Contact Us
Tel: +86-510-83959500
Mob: +8613812051222
E-mail: yjejx@aliyun.com
Address: No.28 Tianshun Holly Road, Yang Town Industrial Park, Huishan District, Wuxi City, Jiangsu Province, China
Home > Knowledge > Content
Aluminum honeycomb panel press maintenance points
Jan 18, 2019

Regarding the daily maintenance of the aluminum honeycomb panel press, it mainly includes pre-class maintenance work, maintenance work in the shift, and maintenance work after the shift. The pre-class maintenance mainly refers to checking whether the oil pool, oil level and oil mark meet the prescribed standards. If it does not meet the requirements, it should be replenished in time. Check if the button is flexible and there is no jam. Check if the motor ground wire is loose, detached or damaged. If it is loose, it should be tightened, and it should be notified to the maintenance personnel if it is loose or damaged.

 

In addition, it is necessary to confirm that the safety protection device of the aluminum honeycomb plate press is complete and reliable, the handles are flexible, and the nuts of each part are well fastened. When the maintenance is in the class, start the hydraulic pump, check whether the hydraulic pump works well, and whether the sealing parts and pipelines are blocked or leaked. Check if the limit switch works well and the bump positioning is normal. And always pay attention to the temperature rise of each moving parts and the sound is normal.

 

After the completion of the production operation, it is the after-sales maintenance of the aluminum honeycomb panel press. The main contents are as follows: 1. Check and clean the active parts. 2. Each control handle (switch) is placed in neutral (zero position). 3. Inspect, clean, and organize the work surface and work area.

 

https://www.yjepressmachine.com/


Previous: Main working device and starting operation of short cycle laminating hot press

Next: The main production process of the plywood production line