Contact Us
Tel: +86-510-83959500
Mob: +8613812051222
Address: No.28 Tianshun Holly Road, Yang Town Industrial Park, Huishan District, Wuxi City, Jiangsu Province, China
Home > Knowledge > Content
Automatic wood-based panel equipment use Note
Jun 21, 2018

First of all, before use, it is necessary to check whether there is any damage on all aspects of the automatic panel equipment. Look at the gears. There is no shortage of oil between the parts. You can lubricate the parts between the various parts using the lubricant. It will be more flexible.

The second is to take into account the standard operation of automatic panel-making equipment. From the beginning of the new year, there will certainly be many new employees to join. Therefore, we must first cultivate it, bring it with the old staff, and familiarize ourselves with the operation process and then proceed with the operation. Prevent danger.

Finally, in the process of use, it is necessary to always pay attention to whether there is any abnormality in the automatic panel-based equipment. If there is a case of Caton or severe vibration, the operation must be stopped in time, and the work should be done after inspection.

Previous: What is a plywood hot press?

Next: How to solve the heat reflow problem of hot press