Contact Us
Tel: +86-510-83959500
Mob: +8613812051222
Address: No.28 Tianshun Holly Road, Yang Town Industrial Park, Huishan District, Wuxi City, Jiangsu Province, China
Home > Knowledge > Content
Hot press machine maintenance knowledge
Jun 21, 2018

The equipment of hot press manufacturers is widely used in the sheet metal processing industry. If you want to exert the application effect of hot presses, the related maintenance knowledge cannot be ignored. This has a great influence on the use of hot presses.

In the application of hot presses, it is usually necessary to conduct a comprehensive inspection every six months. It is also necessary to observe whether or not to perform the treatment according to the wear of the inspection piston surface. At the same time, it is also necessary to observe the wear condition of the seal ring to observe whether to perform cleaning or replacement. For the pulley chain of the hot press, we recommend that you inject oil for 24 hours, and use 30-stroke oil.

For the rolling bearing on the equipment of the hot press machine, it needs to be cleaned or replaced every six months so as to ensure the best application effect of the use of the hot press.

Previous: The working principle of the mold temperature machine

Next: Some comparisons between multi-layer and single-laminate presses