Contact Us
Tel: +86-510-83959500
Mob: +8613812051222
Address: No.28 Tianshun Holly Road, Yang Town Industrial Park, Huishan District, Wuxi City, Jiangsu Province, China
Home > Knowledge > Content
Inspection and adjustment of the operation of wood-based Laminating Press
Dec 21, 2018

In the operation of the wood-based Laminating Press, in order to further improve the product quality, it is often necessary to appropriately adjust the control time of the time relay according to the thickness and quality required by the sheet. The second is to check the steam pressure and the temperature of the hot plate, check the pipeline for leaks, and pay attention to the temperature of the hot plate after the water is squeezed.


In addition, it is necessary to carefully check whether the pressure rise and pressure reduction at different stages of the three-stage pressurization process of the wood-based Laminating Press meet the pressure and duration of the process requirements, and adjust the relevant mechanisms in time to ensure the product. quality.


After the completion of the operation, it is necessary to shut down the wood-based Laminating Press in time. The specific shutdown steps are as follows: 1. Stop receiving the slab from the molding machine; 2. When the loading machine sends the last batch of slabs to the hot press, stop. The plate loading machine and the infeed conveyor; 3. When the hot press unloads the last batch of plates, stop the oil pump motors, close the steam valve and the water spray valve; 4. When the unloader unloads the board, stop the unloader And the pad conveyor, turn off the main power switch.

Previous: Analysis of the cause of the abnormality of the moulding Press

Next: Product description and application advantages of the testing hot press