Contact Us
Tel: +86-510-83959500
Mob: +8613812051222
E-mail: yjejx@aliyun.com
Address: No.28 Tianshun Holly Road, Yang Town Industrial Park, Huishan District, Wuxi City, Jiangsu Province, China
Home > Knowledge > Content
The working principle of the mold temperature machine
Jun 21, 2018

The mold temperature machine is composed of a water tank, a heating and cooling system, a power transmission system, a liquid level control system, a temperature sensor, and an injection port. Usually, the pump in the power transmission system causes the hot fluid to reach the mold from the water tank with the built-in heater and cooler, and then returns from the mold to the water tank; the temperature sensor measures the temperature of the hot fluid and transmits the data to the control part. Controller; The controller regulates the temperature of the hot fluid and indirectly adjusts the temperature of the mold. If the mold temperature machine is in production, and the temperature of the mold exceeds the set value of the controller, the controller will open the solenoid valve to connect the inlet pipe until the temperature of the hot fluid, ie, the temperature of the mold returns to the set value. If the mold temperature is lower than the set value, the controller turns on the heater


Previous: How to choose a suitable wood-based laminating press?

Next: Hot press machine maintenance knowledge