Contact Us
Tel: +86-510-83959500
Mob: +8613812051222
Address: No.28 Tianshun Holly Road, Yang Town Industrial Park, Huishan District, Wuxi City, Jiangsu Province, China
Home > Knowledge > Content
Workflow and heating system for laminate floor DET production line
Nov 09, 2018

The key point of the lamination process of the laminate floor DET production line is the pressure control. Generally, the higher the pressure, the better the quality of the product. The specific requirement is that the pressure rises smoothly and the pressure is constant. The control accuracy is high, the constant pressure time is accurately controlled, and the product is evenly pressed in all directions. In order to meet the lamination process and product production requirements, the main body design of the equipment should include the loading and unloading system, heating system, pressure system and protection system.

Workflow of laminate floor DET production line

1. Heat the water in the container to a constant temperature.

2. The product is loaded and the sealing head is lowered.

3. Set the working pressure, constant pressure time, and apply pressure and pressure.

4. Automatic pressure relief after the pressure is completed.

5. The seal head rises and the product is removed.

Heating system for laminate flooring DET production line

The heating system of the laminate floor DET production line consists of measuring elements, controllers and heaters. Its function is to raise and control the temperature of the water in the container. The heat is conducted through the water to the pressurized capacitor plate to make it evenly heated. The tablet is softened by heat, which is beneficial to both compression and cracking under pressure.

Previous: Mould press machine parameter setting and application industry

Next: Steel wire winding technology and display device of plastic filter plate moulding press